Product Overview
IRREGULAR DESIGN GROUP
MICRO FLOW ENHANCER
The Micro Flow Enhancer (Micro FE) is the muzzle device component of the Hesion Bow locking system. It was built to improve suppressor performance at the muzzle; rather than splitting its priorities between suppressed and unsuppressed use.
Where a general-purpose muzzle device has to preserve some level of unsuppressed civility; the Micro FE is freer to bias the system toward gas efficiency inside the can. That trade is intentional. It is meant to give compatible suppressors a cleaner start at the muzzle by prioritizing suppressor enhancement over bare-muzzle flash behavior.
The Micro FE is shaped to support what happens after the bullet leaves the bore and enters the suppressor.
By driving unburned powder and high-pressure gas through the hollow tines directly into the suppressor’s annular intake; the Micro FE burns as much fuel – and as early – as possible. The less chemical energy that reaches the exit of the suppressor still looking for oxygen and heat; the less secondary flash there is for the shooter to deal with. Burn it sooner so it does not flash later.
Like the rest of the Hesion Bow family; the Micro FE is built around a 15-degree included taper and a 1.125-8 American buttress thread. The ridged base ring provides the locking indexes for the Hesion Bow pawls; while the coarse thread form is used to keep the mounting interface serviceable under heat; fouling; and repeated use.
FEATURES
- Designed to maximize suppressor performance by sacrificing unsuppressed flash reduction
- Flow and jetting tuned for energy burn inside the can instead of outside
- Ideal for suppressor-only shooting with any hybrid suppressor
- No timing required for correct performance
SPECS
| OVERALL LENGTH | 1.88” |
| CALIBER/THREAD | 5/8x24 – up to .338cal |
| CALIBER/THREAD | 1/2x28 – up to 6MM |
| MANUFACTURING | Laser Powder Bed Fusion (LPBF) |
| TAPER ANGLE | 15 degrees included |
| MOUNT INTERFACE | 1.125-8 American Buttress Thread |
| DIAMETER | 1.25” |
| LENGTH ADDED TO BARREL | 1.2” |
| MOUNT | Hesion Bow |
| COMPATIBLE SUPPRESSORS | Hesychia SIXK Hesychia SIXK-H Hesychia 556UK Hesychia 556UK-H |
