Product Overview
The internal cell is made by LG Chem in Korea. A high-quality protection PCB/BMS is then added; along with the button/nipple top in an ISO 9001 that is certified factory to all safety standards. A black wrap over the top holds it all together.
These are manufactured with a high-quality PCB including a Japanese Ricoh protection IC for 18A high current cutoff (most PCBs cannot handle this much current). This circuit protects the battery from mishandling; overcharge; or over discharge while allowing the battery to do its job properly. Sold as a set of 2.
Modlite 18350 1200mAh Protected Cell
These are manufactured with a high-quality PCB including a Japanese Ricoh protection IC for 18A high current cutoff (most PCBs cannot handle this much current). This circuit protects the battery from mishandling; overcharge; or over discharge while allowing the battery to do its job properly. Sold as a set of 2.
Modlite 18350 1200mAh Protected Cell
- Max Continuous Discharging Current: 10A
- Typical Capacity: 1200 mAh
- Style: Button Top
- Approximate Dimensions (including button): 38.1mm length x 18.6 mm diameter
- Maximum Length: 38.1mm
- Discharge cut-off voltage: 2.5V (approximate)
- Voltage: 3.6V
- Full Charge Voltage: 4.2V
- Charge Current: 1.5A standard
- Protection Cutoff Current: ~18A
- Max Continuous Discharging Current: 10A
- Typical Capacity: 3500 mAh
- Style: Button Top
- Approximate Dimensions (including button): 69.1mm length x 18.6 mm diameter
- Maximum Length: 6mm
- Discharge cut-off voltage: 2.5V (approximate)
- Voltage: 3.6V
- Full Charge Voltage: 4.2V
- Charge Current: 5A standard
- Protection Cutoff Current: ~18A
