Unknown Suppressors

Unknown Suppressors

U.S. HUB Adapter

U.S. HUB AdapterDirect thread mount made for the U.S. Reaper.Comes in 5/8×24 or 1/2×28.Grade 5 TIDLC Coating – Low friction; high durability; and corrosion resistantBravo Threaded (1.375×24)

Unknown Suppressors

U.S. Adapter & Removal Tool | 1/2x28-5/8x24

U.S. ADAPTER & REMOVAL TOOL This 1/2-28 to 5/8-24 thread adapter gets your rifle ready to attach an OG or OG L. Notches in the back make it easy to remove just in case it gets stuck inside.Tool works...

Unknown Suppressors

U.S. NHS | 6.5mm

THE NHS (NOT HEARING SAFE) The U.S. NHS (formerly Comp) brings Unknown Suppressors' 3D printed Titanium suppressors to the PRS stage and hunting markets; putting all of the suppressor in front of the...

Unknown Suppressors

U.S. Reaper | 6.5mm

3D Printed from Titanium; the Reaper is as strong as it gets with no welds and no weak points. Both ends are threaded; HUB for attachment; and the same threads as the OG L for the end cap.Coming in...

Unknown Suppressors

U.S. Reaper | .30 Cal

3D Printed from Titanium; the Reaper is as strong as it gets with no welds and no weak points. Both ends are threaded; HUB for attachment; and the same threads as the OG L for the end cap.Coming in...

Unknown Suppressors

U.S. OG Six-Five

The OG makes rifles quiet and sound better. For most suppressors; bore size does not have a noticeable effect on suppression levels when a smaller caliber bullet is shot through it. But US found that...

Unknown Suppressors

U.S. OG L/Reaper Endcap

UNKNOWN SUPPRESSORS - OG L / REAPER ENDCAP Just the endcap for an OG L or a Reaper. The threads are the same; so you can use it on either suppressor.Made of 7075 Anodized aluminum.Available in .30...

Unknown Suppressors

U.S. OG 6-S

UNKNOWN SUPPRESSORS - U.S. OG 6-S The OG 6-S is the newest; lightest; and most innovative suppressor from U.S. Featuring a mountain landscape design and beveled ends; the 6-S brings ultimate...