Product Overview
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
Available with or without the front binder plate.
SPECIFICATIONS
- 3.055” Outside Length
- 2.870” max cartridge overall length (COAL) with binder plate
- 2.960” max cartridge overall length (COAL) without binder plate (see limitations below)
- 3.90” Rear Height
10-round magazine includes 2 internal ribs that help reduce friction between the cartridge and magazine body and provide a smooth transition from a double stack to single feed at the top of the magazine.
COMPATIBILITY
These magazines will need to be slightly modified to function with Howa 1500 SA rifles.
- 308WIN
- 6mm Creedmoor
- 243WIN
- 260 Rem
- 6.5 Creedmoor
- 7mm-08 Win
- 308/7.62x51 NATO
- 22 - 250 Rem (will work at a reduced capacity)
The standard length long action magazine in an MDT Chassis is 3.715" unless otherwise noted in the description stating CIP or 3.85 for the longer magazine well. If you purchased a rifle direct from an OEM or retailer; please check the specifications.
Remington Tactical Chassis Rifle and 338 Lapua XCR rifles use a 3.775" magazine not available from MDT. Tikka T3/T3x and Savage Axis long action calibers in MDT chassis; you must use the 3.560" option.
Will not work with 300 Remington Ultra Mag; 300 Weatherby; and similar cartridges
COMPATIBILITY
- 300WM; 7PRC; and other magnum cartridges.
- 3.560" magazine: 3.480" COAL
- 3.715" magazine: 3.600" COAL
- 3.850" magazine: 3.740" COAL
Additional Info
BINDER PLATE DETAILS
The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”.
The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp.
